cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Need to share some code when posting a question or reply? Make sure to use the "Insert code sample" menu option. Learn more! X

How do I create an angled datum plane?

BrandonCroft
1-Newbie

How do I create an angled datum plane?

Hello, I am new to Pro E. I am trying to create an angled datum plane. What is the easiest way to do this?


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
2 REPLIES 2

The way I create an angled datum plane is by creating an axis normal to one of the three main datums and constraining it to the other two datums. Then I select the datum plane tool Icon and it (the datum you are creating) will rotate around the axis you just created. You can adjust your pivot axis by adjusting your offset constraints from the original two datums.

Hope that helps

Hi Brandon,

The method Debra describes is pretty much the simplest. You can do a similar method using a geometry edge and face to give the angle though it is more robust to use the first method.

If you need the plane at a compound angle to the original datums then a tidy method is to create an offset datum coordinate system to your default coordinate system and use the Orientation tab (WF4) and choose rotations about X and/or Y and/or Z. Once you have the angles you want then pick the CYS you have just created and select the Datum Plane create tool. You will see that it gives a translation along an axis (default X).

Hope this helps.

Brent

Top Tags