cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - You can subscribe to a forum, label or individual post and receive email notifications when someone posts a new topic or reply. Learn more! X

Showing tolerances in edit mode - how to turn off?

KrisR
1-Newbie

Showing tolerances in edit mode - how to turn off?

1.png

Could someone please advise me on how to get rid of the tolerance display in edit mode? Thank you!


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions
egifford
4-Participant
(To:KrisR)

Kris,

Go to the Tools menu, Environment and uncheck the Dimension Tolerances setting under Display, then click on OK at the bottom of the Environment dialog.

env_tol.JPG

This can be controlled with a config setting (options) of "Tol_Display" set to "No".

You can also use "Tools" "Customize Screen" to add a button to your toolbar to toggle the tol display on / off.

tol_disp_btn.JPG

(drag the "Tolerances" function / button to an appropriate toolbar in your Pro/E screen so it is there as a toggle)

Erik

View solution in original post

8 REPLIES 8
KrisR
1-Newbie
(To:KrisR)

I'm going through the PTC Precision LMS tutorials and every single one of the models I open has limits set - I can't change dims as instructed through the tutorials. I'm assuming this is template driven but I do not know how to shut it off.

KevinBradberry
5-Regular Member
(To:KrisR)

I would hope that there is a way to change them all to nominal display at the same time, but until we find out you can do this:

right-click on the dimension, select Properties, then set the tolerance to Nominal for each dim one at a time.

Yeah, I saw that *sobs*

It's getting very frustrating doing this training when it is not working correctly. Their instructions to set up the whole process on how to do this training is incorrect as is the config.pro file and how it points to the templates they want you to use for the training.

Hi

Go to tools > options

This will open your config.pro

Set the value of the following

Tol_mode nominal

save your config to default location(start in directory)

Now create a new part

This will resolve your issue for new parts

(If you face any problem please reply)

Regards

K.mahanta

That did not solve the issue.

I am using the supplied parts in the PTC training downloads.They are ALL coming up showing limits. Is there a way to alter the template file, and how? I've added this to config, but it's not working on the files I am opening,

These are not newly created dimesnions, they are existing.

KevinBradberry
5-Regular Member
(To:KrisR)

Like he said, it only works on new parts.

Try selecting all the dimensions together, right-click and edit the properties to change all tolerances at once.

To select in 3D space make sure the selection filter is on Annotation, and if in drawing mode set it to Dimension.

egifford
4-Participant
(To:KrisR)

Kris,

Go to the Tools menu, Environment and uncheck the Dimension Tolerances setting under Display, then click on OK at the bottom of the Environment dialog.

env_tol.JPG

This can be controlled with a config setting (options) of "Tol_Display" set to "No".

You can also use "Tools" "Customize Screen" to add a button to your toolbar to toggle the tol display on / off.

tol_disp_btn.JPG

(drag the "Tolerances" function / button to an appropriate toolbar in your Pro/E screen so it is there as a toggle)

Erik

KrisR
1-Newbie
(To:egifford)

Thank you SO MUCH Erik. That did the trick! I was about to go batty!

Top Tags