topic Re: Problem to shell , Probleme beim schalen in Creo Modeling Questions

Problem to shell , Probleme beim schalen

Starmbi — Sun, 24 Aug 2014 08:23:22 GMT

Hello!I have some experience with other Cad (ViaCad), but i am a beginner with PTC Creo Elements. Here is my first model:If I try to shell it with a hole in the marked position (coloured ring in the picture), I get the message:Bei Erstellung der Schale wurde(n) 8 Fläche(n) gelöscht.

Re: Problem to shell , Probleme beim schalen

pburtsev — Mon, 25 Aug 2014 06:21:32 GMT

Hello. May be you try to create shell with too large wall thickness? Try my part from archive. My Creo version is CREO 2.0 M120.

Re: Problem to shell , Probleme beim schalen

MartinHanak — Mon, 25 Aug 2014 06:53:49 GMT

Just info ...

Stefan is not using Creo Parametric. He is probably using Creo Elements Direct (file with .se2 extension).

Martin Hanak

Re: Problem to shell , Probleme beim schalen

Starmbi — Mon, 25 Aug 2014 09:48:27 GMT

Hello,

yes, Martin is right.

I am wrong here?

Stefan

Re: Problem to shell , Probleme beim schalen

Patriot_1776 — Mon, 25 Aug 2014 17:05:32 GMT

I've been having shell issues, and offset surface issues with geometry I know should work. It seems creo is not as robust in this respect compared to earlier versions of Pro/E, kind of maddening.....

Re: Problem to shell , Probleme beim schalen

TomD.inPDX — Mon, 25 Aug 2014 19:18:58 GMT

I've had trouble shelling objects that use continuous curvature rounds. Similar with thickening when used on quilts.

Re: Problem to shell , Probleme beim schalen

MartinHanak — Tue, 26 Aug 2014 06:31:24 GMT

Stefan,

you have opened this discussion in Creo family area.

I suggest you to open in Creo Elements/Direct area once again.

Use the following link to reach Creo Elements/Direct area.

http://communities.ptc.com/community/creo-elements-direct?view=discussions

Good luck

Martin Hanak