topic Re: message line in Creo Modeling Questions

message line

ptc-1130706 — Tue, 24 Mar 2015 05:53:22 GMT

hi,how could i put the message line under the window in pro-e 5.0?

Re: message line

MartinHanak — Tue, 24 Mar 2015 11:57:15 GMT

Hi,

I think that in WF5 message window position is fixed above graphics window and cannot be moved down.

In WF4 this setting was saved in config.win file.

Martin Hanak

Re: message line

ClintWalton — Tue, 24 Mar 2015 17:22:20 GMT

As Martin said, in Pro/ENGINEER Wildfire 4.0 we could change the "Dashboard Position" under Tools > Customize Screen > Options with the radio buttons for Above/Below the graphics area. This option was removed in Wildfire 5.0 and later.

In Wildfire 5.0, the message log was fixed above the graphics area. In Creo Parametric, the message log was fixed below the graphics area. The placement change was presumably to make room for the new command ribbon introduced in drawing mode of Creo Elements/Pro 5.0 and later implemented for all modes in Creo Parametric.

The config.pro option "visible_message_lines" might be of interest. This will define the default number of visible lines in the message log.

Re: message line

ptc-1130706 — Thu, 26 Mar 2015 03:44:05 GMT

thank you

Re: message line

ptc-1130706 — Thu, 26 Mar 2015 03:44:39 GMT

thanks