topic Re: Creo Parametric cannot create part in PTC Education Forum https://www.ptcusercommunity.com/t5/PTC-Education-Forum/Creo-Parametric-cannot-create-part/m-p/100864#M10270 <HTML><HEAD></HEAD><BODY><P>Ben,</P><P></P><P>This is a graphics card issue. Try updating your graphics driver. Computers are often shipped with outdated drivers and updating it typically fixes this problem.</P><P></P><P>If updating the driver does not help, use the config.pro option "graphics win32_gdi" to bypass the graphics card in Creo. You can find more detailed instructions on this <A _jive_internal="true" href="https://www.ptcusercommunity.com/message/179284#179284">here</A>. </P><P></P><P>Hope this helps.</P><P></P><P>Regards,</P><P>Adam</P></BODY></HTML> Sat, 26 May 2012 16:36:12 GMT AdamHaas 2012-05-26T16:36:12Z Creo Parametric cannot create part https://www.ptcusercommunity.com/t5/PTC-Education-Forum/Creo-Parametric-cannot-create-part/m-p/100863#M10269 I have not been having a good experience with Creo. I initially had problems getting it running (due to Quality Agent), and now when I create a new part I have a new issue:Here is Creo Parametric when I open it: And when I start a new part:As you can see, the 'working area' Sat, 26 May 2012 02:10:20 GMT https://www.ptcusercommunity.com/t5/PTC-Education-Forum/Creo-Parametric-cannot-create-part/m-p/100863#M10269 ptc-4490338 2012-05-26T02:10:20Z Re: Creo Parametric cannot create part https://www.ptcusercommunity.com/t5/PTC-Education-Forum/Creo-Parametric-cannot-create-part/m-p/100864#M10270 <HTML><HEAD></HEAD><BODY><P>Ben,</P><P></P><P>This is a graphics card issue. Try updating your graphics driver. Computers are often shipped with outdated drivers and updating it typically fixes this problem.</P><P></P><P>If updating the driver does not help, use the config.pro option "graphics win32_gdi" to bypass the graphics card in Creo. You can find more detailed instructions on this <A _jive_internal="true" href="https://www.ptcusercommunity.com/message/179284#179284">here</A>. </P><P></P><P>Hope this helps.</P><P></P><P>Regards,</P><P>Adam</P></BODY></HTML> Sat, 26 May 2012 16:36:12 GMT https://www.ptcusercommunity.com/t5/PTC-Education-Forum/Creo-Parametric-cannot-create-part/m-p/100864#M10270 AdamHaas 2012-05-26T16:36:12Z Re: Creo Parametric cannot create part https://www.ptcusercommunity.com/t5/PTC-Education-Forum/Creo-Parametric-cannot-create-part/m-p/100865#M10271 <HTML><HEAD></HEAD><BODY><P>Thank you for that, I will look into it. </P></BODY></HTML> Sat, 26 May 2012 23:29:29 GMT https://www.ptcusercommunity.com/t5/PTC-Education-Forum/Creo-Parametric-cannot-create-part/m-p/100865#M10271 ptc-4490338 2012-05-26T23:29:29Z