topic Windchill 12.0.1.0 without WindchillDS in Windchill

Windchill 12.0.1.0 without WindchillDS

DanielScheidegg — Fri, 12 Feb 2021 13:20:23 GMT

Hi all

Has anyone already installed Windchill 12.0.1.0 with MS ActiveDirectory only, i.e. without WindchillDS, and then upgraded from 11.1?
Is there any experience you can share?

Thanks

Best Regards

Daniel

Re: Windchill 12.0.1.0 without WindchillDS

AndyHermanson — Fri, 12 Feb 2021 14:57:53 GMT

We are in the process of trying this. No luck yet.

Re: Windchill 12.0.1.0 without WindchillDS

DanielScheidegg — Fri, 12 Feb 2021 15:03:56 GMT

Same here..

let‘s keep in touch 😉

Re: Windchill 12.0.1.0 without WindchillDS

MikeLockwood — Fri, 12 Feb 2021 17:30:19 GMT

I was able to update a test 12.0.0.2 system to 12.0.1.0 no problem.

Was not able to install 12.0.1.0 directly.

I created multiple tech support cases with a screen capture of the exact part of the Solutions installer where one needs to select an existing LDAP install - no way evident how to select an existing Windchill DS. Nothing in the install documentation and tech support so far has not been able to advise what to do.

We were thinking about going to 12.0.1.0 but have backed off and will now upgrade (from 11.0) to 12.0.0.3 and wait for 12.0.1.0 to get more mature.

Pretty MAJOR change and very little from PTC on this.

Re: Windchill 12.0.1.0 without WindchillDS

AndyHermanson — Mon, 15 Feb 2021 14:53:25 GMT

So to clarify, you can go from 11.0 to 12.0.0.x to 12.0.1.x, but you cant go straight from 11.0 to 12.0.1.x?

Thanks,

Andy

Re: Windchill 12.0.1.0 without WindchillDS

MikeLockwood — Mon, 15 Feb 2021 16:42:33 GMT

Did multiple test upgrades from 11 to 12.0.0.x, but haven't yet tried going from 11 to 12.0.1.x.

Re: Windchill 12.0.1.0 without WindchillDS

TomU — Mon, 15 Feb 2021 18:14:42 GMT

Not exactly the same scenario, but I'm running into all kinds of issues at the moment as well.

Clean install of 12.0.0.1 using Windchill DS from 11.2. Fully configured with AD, etc.
Ran upgrade manager to upgrade from 11.0 M030. No issues.
Repeated step two several times (fresh vault & DB copy, etc.), no issues
Installed CPS 12.0.0.2
Updated to 12.0.1.0
Attempted to run the upgrade manager again (step 2) from 11.0 M030. All kinds of problems. Unable to get the upgrade manager to successfully finish now due to LDAP issues.

Tech support seems unable to figure out how to get the upgrade manager to work correctly with 12.0.1.0 due to the new LDAP migration piece. They are currently recommending I roll the whole thing back to 12.0.0.2, run the upgrade manager, and then re-update to 12.0.1.0 again. Not real excited about that...

Re: Windchill 12.0.1.0 without WindchillDS

Arpit-Singh — Fri, 26 Feb 2021 17:14:21 GMT

So between the step 5 and 6 can you elaborate on the steps as its unclear at this point.

Perhaps from the details we may be able to figure out what's going on..

Re: Windchill 12.0.1.0 without WindchillDS

MikeLockwood — Fri, 26 Feb 2021 17:31:07 GMT

I tried again to do a new clean install of 12.0.1.0 on a machine that already has (only) Windchill DS from 11.1, and cannot figure out how in the solutions installer to select the existing Windchill DS.

I created a new tech support case asking specifically what to do - not yet solved.

Re: Windchill 12.0.1.0 without WindchillDS

Arpit-Singh — Fri, 26 Feb 2021 17:43:40 GMT

I think in PSI, if you treat Windchill DS as a v3 compliant LDAP and provide necessary details it will move forward.

Re: Windchill 12.0.1.0 without WindchillDS

RandyJones — Fri, 26 Feb 2021 17:57:44 GMT

I am doing the following right now:

Installed WindchillDS from 11.2 .1.0 as standalone solution
Installing new clean install of 12.0.1.1
Like Arpit-Singh said you select "Other V3 Compliant LDAP" and fill in the details

Re: Windchill 12.0.1.0 without WindchillDS

TomU — Fri, 26 Feb 2021 19:36:00 GMT

@Arpit-Singh wrote:

So between the step 5 and 6 can you elaborate on the steps as its unclear at this point.

Perhaps from the details we may be able to figure out what's going on..

Starting condition:

Windchill 12.0.1.0 fully configured and happy, but not live in production yet. Need to execute at least two more successful upgrade manager runs before going live. Previous upgrade manager runs occurred prior to updating the installation from 12.0.0.2 to 12.0.1.0.

Steps to refresh from production:

Export the database from source (11.0 M030) and use it to overwrite the target (12.0.1.0)
Export the LDAP from source, append it to LDAP from target, and then re-import the merged file to target.
Fix the JDNI adapter names. (See CS337415 step 5)
Copy the file vault from source to target
Run the upgrade manager from Windchill shell
Remove data from TableViewDescriptor table in the database. (See CS300564)
Add missing translation preferences. (See CS225163)
Reset the GUID (server must be running, restart after changing)

Since the update to Windchill 12.0.1.0, the process is now dying at step 5 - run the upgrade manager:

By the way, Frank V. is the TSE with the case.

Re: Windchill 12.0.1.0 without WindchillDS

TomU — Fri, 26 Feb 2021 19:42:24 GMT

The configuration branch on the source (running on the target) is most definitely there:

Re: Windchill 12.0.1.0 without WindchillDS

DanielScheidegg — Mon, 01 Mar 2021 08:42:21 GMT

hello all,

I have given up on installing 12.0.1.0 without WindchillDS....
The installation Windchill 12.0.1.0 basically works, the users from the ActiveDirectory are also available. But the groups from the AD can not be found, although this is entered in the database in the table wtGroups, after a search of the users....
The PTC supporter has reported this to R&D, but so far I have no feedback on this.... Let's see how it goes on here.

I have now followed the following scenario:
- Install WindchillDS from 11.2.1.0
- Install Windchill 12.0.1.0 with "other V3 compliant LDAP".
- Upgrade 11.1 M020 to 12.0.1.0
So far everything worked without problems.

I will now try to configure the system with ActiveDirectory and disable the WindchillDS.

It's a real shame that PTC can't support properly here.

I will get back to you when I have news.

Re: Windchill 12.0.1.0 without WindchillDS

Arpit-Singh — Mon, 01 Mar 2021 10:48:49 GMT

Okay, this make things more clear.

Question:

What details did you put into the Source LDAP connection of UpgradeManager? Can you post a screenshot?

Re: Windchill 12.0.1.0 without WindchillDS

Arpit-Singh — Mon, 01 Mar 2021 11:52:47 GMT

So for me, I did a brand new install and configured WC 12.0.1 with AD.

And I can search the groups and users from AD

Here is my JNDI Adapter mappings:

Re: Windchill 12.0.1.0 without WindchillDS

AK_9115379 — Mon, 01 Mar 2021 12:18:20 GMT

Arpit: I read in PTC that json files will hold infoengine entries. Please help me with the location of these json files.

Also I do not see any url (Corporate Ldap) in the screen shot share above by you for.

We have gone ahead with the work around as below:

1) Install WDS using 11.2

2) Install 12.0.0.X

3) Run upgrade manager and upgrade to 12.0.0.X

4) Run update tool to update to 12.0.1.X

We need exact steps tp be captured in PTC article.

Re: Windchill 12.0.1.0 without WindchillDS

DanielScheidegg — Mon, 01 Mar 2021 12:25:54 GMT

Dear Arpit

I have already installed Windchill 12.0.1.0 several times and also tried various tests and configurations with PTC (CS15745873). I have escalated the case and it is currently at R&D.

For your understanding, in 12.0.1.0 with following filter, I get the yellow warning symbol:

adding the Filter windchill.mapping.group.filter

at least the Windchill Licensing groups are visible, but no AD Groups

in 11.1 I have the following, and that is working:

thanks

Daniel

Re: Windchill 12.0.1.0 without WindchillDS

TomU — Mon, 01 Mar 2021 13:28:47 GMT

The name of the target LDAP.

The new target server is intentionally blocked from accessing the original source server to minimize the risk of accidentally messing up the source system (which is still live in production.)
I followed the steps listed in CS337415. Per that article, the name of the target LDAP is to be used in the upgrade manager:

----------------------------------------------------------------

To be clear, these problems are only occurring with 12.0.1.0. With 12.0.0.2 and prior, no manual editing of the merged LDAP file is required. The upgrade manager runs fine and completes successfully with no errors. I actually rolled my installation back to 12.0.0.2 over the weekend and re-ran the entire upgrade manager process. No issues at all. The problems only start happen after updating to 12.0.1.0.

Re: Windchill 12.0.1.0 without WindchillDS

BjoernRueegg — Mon, 01 Mar 2021 13:53:48 GMT

@Arpit-Singh Have you also once tried to do an upgrade instead a new installation? The upgrade is horribly... No documentation at all to migrate the e.g. 11.1 WDS to 12.0.1 OpenDj, ApacheDs, or even AD. You need to manually change server names in the ldif file, etc.