https://www.ptcusercommunity.com/t5/Windchill/RETRACT-TRANSITION/m-p/1060016#M88646 <P>Version: Windchill Below 11.0</P><P>&nbsp;</P><P>Use Case: Hi, To create an arc movement between the jump between drops, in NC Assembly, there's an option called Retract_transition. You place it in the ARC_TRANSITION option and set the RETRACT_RADIUS. Following these steps from the manual, the line comes out straight, making a corner instead of an arc. I don't know why it's not arcing.</P><P><BR /><SPAN>Description: </SPAN></P><P>Hi,<BR />To create an arc movement between the jump between drops, in NC Assembly, there's an option called Retract_transition. You place it in the ARC_TRANSITION option and set the RETRACT_RADIUS. Following these steps from the manual, the line comes out straight, making a corner instead of an arc. I don't know why it's not arcing.</P> Tue, 31 Mar 2026 14:58:02 GMT YA_12845300 2026-03-31T14:58:02Z https://www.ptcusercommunity.com/t5/Windchill/RETRACT-TRANSITION/m-p/1060016#M88646 <P>Version: Windchill Below 11.0</P><P>&nbsp;</P><P>Use Case: Hi, To create an arc movement between the jump between drops, in NC Assembly, there's an option called Retract_transition. You place it in the ARC_TRANSITION option and set the RETRACT_RADIUS. Following these steps from the manual, the line comes out straight, making a corner instead of an arc. I don't know why it's not arcing.</P><P><BR /><SPAN>Description: </SPAN></P><P>Hi,<BR />To create an arc movement between the jump between drops, in NC Assembly, there's an option called Retract_transition. You place it in the ARC_TRANSITION option and set the RETRACT_RADIUS. Following these steps from the manual, the line comes out straight, making a corner instead of an arc. I don't know why it's not arcing.</P> Tue, 31 Mar 2026 14:58:02 GMT https://www.ptcusercommunity.com/t5/Windchill/RETRACT-TRANSITION/m-p/1060016#M88646 YA_12845300 2026-03-31T14:58:02Z