topic Re: Turn on Part Browser in CED Drafting (Mixed UI) in Drafting

Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Sun, 04 Aug 2024 18:17:19 GMT

I use Creo Elements/Direct Drafting (Mixed UI).

I want to turn on Part brower as the below picture to manage layout. Please guide me how to turn it.

I appreciate your prompt response.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

AndyPoulsen — Mon, 05 Aug 2024 04:01:27 GMT

If you type

wui_part_browser

in the user input line and press return it should open the Part Browser for you..

I hope this helps!

andy

Re: Turn on Part Browser in CED Drafting (Mixed UI)

TT_11417282 — Mon, 05 Aug 2024 05:07:24 GMT

It is exactly what i needed. thanks for your help.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

AndyPoulsen — Mon, 05 Aug 2024 05:15:02 GMT

Great! Glad to help!

andy

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Wed, 07 Aug 2024 06:26:17 GMT

Thank for your help. And I want to turn-on Part Browser is default. Could you show me how to do it?

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Kotom-Eng — Wed, 07 Aug 2024 07:40:15 GMT

One solution is to add WUI_PART_BROWSER at the end of the file customize.m located in the installation directory C:\Program Files\PTC\Creo Elements\Direct Drafting 20.xxx

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Wed, 07 Aug 2024 07:51:59 GMT

Wow, it really worked. Thank you so much.

But I have 2 trouble about setting default, please guide me how to do:

1. Set default construction line at this position.

2. Set japan is language default.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Kotom-Eng — Wed, 07 Aug 2024 08:11:03 GMT

1. Normally, when you quit Drafting, it saves automatically the customisation of the tool bars in your personal directory:

C:\Users\your_login_name\AppData\Roaming\PTC\Creo Elements Direct Drafting 20.4\20.4 (for example)

The name of the saved file is layout.m

Check if this file has been modified after having quit Drafting.

2. Normally, the language is set during the installation of Drafting, Next time you install Drafting, pay attention to the setting of the language.

Meanwhile, to avoid re-installation, add CHANGE_LOCALE 'ja' at the end of the file customize.m

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Wed, 07 Aug 2024 08:28:13 GMT

I appreciate your instructions. I got it.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Fri, 09 Aug 2024 10:02:54 GMT

Dear Mr. Kotom,

I have trouble again with CED Drafting.

Problem 1: When I set Japan is default language, layout between tool table and tab is stacked as below picture. I want to it is arranged as Eng language.

Problem 2: I want when I change the standard and go back to the software next time it will save as that standard. For example, I change to JIS standard and I go back software, it will save as that standard. But right now, when I go back software, it always is Company standard.

Please guide me how to fix this 2 problem.

Thanks advanced.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Kotom-Eng — Fri, 09 Aug 2024 11:08:25 GMT

Dear Curtis,

Problem 1:

In the me10.ini file located in the installation directory, replace the line

LANGUAGE=

LANGUAGE=ja

Remove CHANGE_LOCALE 'ja' in the customize.m file.

Then restart Drafting.

This is a better solution than the preceding one.

Problem 2:

Add Dim_standard_jis at the end of the customize.m file.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Fri, 09 Aug 2024 14:16:13 GMT

Dear Mr.Kotom,

I'm clear problem 1.

Problem 2: I want to when restart Drafting, the standard will be the standard that I chose in the previous session, not just JIS standard.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Kotom-Eng — Fri, 09 Aug 2024 16:56:42 GMT

Dear Curtis,

I'm sorry, I did not catch what you wanted.

Drafting cannot save the dimension standard since it is based on macros. A macro has to be done. Are you at ease with macros?

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Fri, 09 Aug 2024 18:16:31 GMT

Dear Mr. Kotom,

I have no knowledge about macro. Could you describe it or send me a link to learn it?

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Kotom-Eng — Sat, 10 Aug 2024 08:02:48 GMT

Dear Mr Curtis,

I will write the macro because I think it is interesting to add it to my KE Tools (free). Meanwhile you can read this document:

https://support.ptc.com/help/creo/ced_drafting/r20.7.0.0/en/ced_drafting/baggage/writemac.pdf

Writing macros is easy and it helps a lot for customising Drafting to your special needs.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Sat, 10 Aug 2024 17:37:12 GMT

Thanks Mr. Kotom. I appreciate your contribution to community.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Kotom-Eng — Mon, 12 Aug 2024 09:52:26 GMT

Dear Curtis,

This is done; The KE Tools are updated with this new functionality. You can download it free from my site below.

Try and test it. If you have any comment or suggestion, do not hesitate.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Tue, 13 Aug 2024 03:01:46 GMT

Dear Mr. Kotom,

I have another problem, please help me. I want to turn on a Tool box table as the below picture. Please guide me how to do it.

The below picture is the tool box when I translate to English.

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Kotom-Eng — Wed, 14 Aug 2024 05:41:45 GMT

Dear Curtis,

If I understand well, you have an existing tool box made with old style MENU and you want to make it in the new style TOOLBAR such as

and insert it in the hereunder toolbar?

Re: Turn on Part Browser in CED Drafting (Mixed UI)

Curtis_Cao — Thu, 15 Aug 2024 05:14:02 GMT

Dear Mr. Kotom,

I'm clear with new style TOOLBAR.

But with problem: automative saving of previous standard chosen.

Your macro don't auto turn on when I restart Drafting. Could you please guide me how to set it default?