topic Re: ModelCHECK Configuration in Analysis

ModelCHECK Configuration

DD_12824480 — Wed, 07 Jan 2026 21:56:11 GMT

STARTPARM is enabled and the parameters from the start file exist in the part, but ModelCHECK still flags them as missing.

Re: ModelCHECK Configuration

kdirth — Thu, 08 Jan 2026 13:08:48 GMT

I believe you need to check the designate box to make the parameters readable by windchill.

Re: ModelCHECK Configuration

Van_AG — Thu, 22 Jan 2026 12:50:20 GMT

What you need should work without STARTPARM at all.

It looks like you have MU_ENABLED set to N in config_init.mc.

Re: ModelCHECK Configuration

anursingh — Mon, 09 Mar 2026 17:16:31 GMT

Hi @DD_12824480,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Please note that industry experts also review the replies and may eventually accept one of them as solution on your behalf.
Of course, if you have more to share on your issue, please pursue the conversation.

Thanks,
Anurag

Re: ModelCHECK Configuration

llie — Tue, 10 Mar 2026 17:16:15 GMT

Try using STR in your ModelCheck file instead of REAL as a test. We do not have anything set to REAL.