topic Re: Creo simulation problem with colors in Analysis

Creo simulation problem with colors

Rostislav — Fri, 27 Mar 2020 18:09:25 GMT

I have a problem with colors in simulation results. This problem occurs when I want to show results with continuous tone. PC specs: CPU - i5 6600K, GPU - GTX 1060 6GB, W10 64bit, drivers are updated, I have tried also clean boot of Windows.

Re: Creo simulation problem with colors

SweetPeasHub — Fri, 27 Mar 2020 18:35:04 GMT

This could be a model setup problem. Do other models do this for you or just this one particular model? Try a much coarser mesh and cyclic symmetry. (model 1/3 of this) And is this Stress or Strain you are showing? It looks like your mesh size is like traditional FEA (small) not P-element (larger). What are your boundary conditions? Stuff like this can happen for certain types of models so it may not be the graphics card. Anyway we hope to hear back about what more things you have tried to fix this.

Re: Creo simulation problem with colors

Rostislav — Fri, 27 Mar 2020 18:51:34 GMT

Every model does the same thing. And this model I've sent to my friend and he has no problem with that. This is stress analysis, but it does the same thing with displacement etc..

Re: Creo simulation problem with colors

DavidBigelow — Fri, 27 Mar 2020 20:30:53 GMT

This may or may not be helpful..

https://www.ptc.com/en/creo-hardware-check

Re: Creo simulation problem with colors

Rostislav — Sat, 28 Mar 2020 08:02:03 GMT

Re: Creo simulation problem with colors

MartinHanak — Sun, 29 Mar 2020 18:47:33 GMT

@Rostislav wrote:

Every model does the same thing. And this model I've sent to my friend and he has no problem with that. This is stress analysis, but it does the same thing with displacement etc..

Hi,

what graphic card is installed in friend's computer ? Drive version ?

Re: Creo simulation problem with colors

DavidBigelow — Sun, 29 Mar 2020 18:49:32 GMT

Depending on how long you have been using Creo (multiple versions) -- you might have a conflict in your config.pro that is presenting this problem... try running Creo without any config.pro options set and see if that makes a difference.

Re: Creo simulation problem with colors

Rostislav — Sun, 29 Mar 2020 19:02:19 GMT

I tried it, still same thing.

Re: Creo simulation problem with colors

Rostislav — Sun, 29 Mar 2020 19:07:04 GMT

My frined uses NVIDIA GeForce GT 620

Re: Creo simulation problem with colors

MartinHanak — Mon, 30 Mar 2020 06:38:02 GMT

@Rostislav wrote:

My frined uses NVIDIA GeForce GT 620

Hi,

what driver version is installed for NVIDIA GeForce GT 620
what Windows version is installed on friend's computer ?

Re: Creo simulation problem with colors

Rostislav — Mon, 30 Mar 2020 07:39:25 GMT

W10 , driver 391.35

Re: Creo simulation problem with colors

MartinHanak — Mon, 30 Mar 2020 07:58:33 GMT

@Rostislav wrote:
W10 , driver 391.35

Hi,

my suggestion ... find, download & install 391.35 on your computer.

Re: Creo simulation problem with colors

ThoRig — Fri, 03 Apr 2020 01:38:54 GMT

I have never been a fan of continuous tone in any FEA software. When PTC acquired Mechanica, PTC removed the capability to view unaveraged vs averaged stress contours. With that said, you would never want to use continuous tone, because you cannot perform continuity checks. However, since PTC no longer has unaveraged stress as an option to look at, then it really does not matter. I admit, I have never seen that type of problem in Simulate. What does the continuous tone look like if you turn on element edges?

Re: Creo simulation problem with colors

Rostislav — Fri, 03 Apr 2020 08:27:01 GMT

I think that there can be problem with my GPU. I tried Creo 5 and Creo 6 and the problem is still there. But on the other hand I have no issues with playing games etc...

Re: Creo simulation problem with colors

marcello_3 — Fri, 24 Apr 2020 20:22:42 GMT

This isn a screen resolution problem, set 1920x1080 in windows and try

Re: Creo simulation problem with colors

Rostislav — Sat, 25 Apr 2020 10:51:55 GMT

Thanks for suggestion but didin't help

Re: Creo problème de simulation avec les couleurs

DenisJaunin — Sat, 25 Apr 2020 16:02:44 GMT

Bonjour,

J'ai les même couleurs avec une carte NVIDIA Quatro P5000 et son dernier driver.

Le logiciel de teste de PTC me dit que ma carte est compatible.

Cordialement.

Denis

Re: Creo simulation problem with colors

MichaelToledano — Fri, 03 Jul 2020 13:06:19 GMT

Hi, Experiencing same symptoms..

Found any solution?

Regards,

Michael

Re: Creo simulation problem with colors

MichaelToledano — Sun, 05 Jul 2020 14:31:48 GMT

Answering myself 😉

Problem solved with Nvidia newest driver 451.48 for GPU Quadro P2000 (from 25.06.2020).

Regards,

Michael

Re: Creo simulation problem with colors

Rostislav — Sun, 05 Jul 2020 17:21:19 GMT

Hello,

it worked for me as well.