topic Re: Creo 2.0 Tool orientation in Vericut for Mill/turn jobs in Manufacturing (CAM) https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Creo-2-0-Tool-orientation-in-Vericut-for-Mill-turn-jobs/m-p/305927#M1208 <HTML><HEAD></HEAD><BODY><P>I've got the same problem. How to fix it? What did you change in configuration/selection?</P></BODY></HTML> Sun, 14 Jun 2015 12:35:04 GMT atyburcy 2015-06-14T12:35:04Z Creo 2.0 Tool orientation in Vericut for Mill/turn jobs https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Creo-2-0-Tool-orientation-in-Vericut-for-Mill-turn-jobs/m-p/305925#M1206 Hello there,I have been trying to simulate material removal for mill/turn toolpaths in vericut. The workcell is Mill-turn 5 axis (see attached file).The tool orientation is right while reviewing toolpath on Creo. Hoever it is chaging in Vericut. Is it just me missing something?Thanks Sun, 13 Dec 2020 18:46:10 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Creo-2-0-Tool-orientation-in-Vericut-for-Mill-turn-jobs/m-p/305925#M1206 ParagVichare 2020-12-13T18:46:10Z Re: Creo 2.0 Tool orientation in Vericut for Mill/turn jobs https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Creo-2-0-Tool-orientation-in-Vericut-for-Mill-turn-jobs/m-p/305926#M1207 <HTML><HEAD></HEAD><BODY><P>There was a problem with the coordinate system selection/configuration. Sorted. Thanks</P><P><IMG alt="Capture.JPG" class="jive-image image-1" src="https://community.ptc.com/legacyfs/online/86911_Capture.JPG" style="height: auto;" /></P></BODY></HTML> Fri, 27 Mar 2015 14:42:37 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Creo-2-0-Tool-orientation-in-Vericut-for-Mill-turn-jobs/m-p/305926#M1207 ParagVichare 2015-03-27T14:42:37Z Re: Creo 2.0 Tool orientation in Vericut for Mill/turn jobs https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Creo-2-0-Tool-orientation-in-Vericut-for-Mill-turn-jobs/m-p/305927#M1208 <HTML><HEAD></HEAD><BODY><P>I've got the same problem. How to fix it? What did you change in configuration/selection?</P></BODY></HTML> Sun, 14 Jun 2015 12:35:04 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Creo-2-0-Tool-orientation-in-Vericut-for-Mill-turn-jobs/m-p/305927#M1208 atyburcy 2015-06-14T12:35:04Z Re: Creo 2.0 Tool orientation in Vericut for Mill/turn jobs https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Creo-2-0-Tool-orientation-in-Vericut-for-Mill-turn-jobs/m-p/305928#M1209 <HTML><HEAD></HEAD><BODY><P>Hi Anna,</P><P></P><P>Try attached steps. Step 18 is for setting a coordinate system for vericut play. Hope this helps.</P><P></P><P>Parag</P></BODY></HTML> Mon, 15 Jun 2015 13:41:20 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Creo-2-0-Tool-orientation-in-Vericut-for-Mill-turn-jobs/m-p/305928#M1209 ParagVichare 2015-06-15T13:41:20Z