topic Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat in Manufacturing (CAM)

Ptc Creo and embeded basic Moldex 3d capabilities in every seat

kerzen — Fri, 04 May 2018 14:34:19 GMT

Dear All,In PTC Creo 3.0 Launch Presentation from June 17, 2014 Brian Thomson announced that New basic capabilities from Moldex 3d will be embedded in every seat of Creo Parametric. I have installed Creo 3.0 M10 and there is no such analysis. Only what i can access is 3d thickness

Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat

danderson — Mon, 03 Nov 2014 13:16:06 GMT

If it is installed you may need to enable the lite version extension by turning it on in the config.pro file like some of the other light extensions (simulate lite, human factors, etc) It may not be implemented yet in Creo 3 ?

Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat

kerzen — Tue, 04 Nov 2014 07:18:36 GMT

Hi Don,

No there is no such config pro. I ve checked.

It is implemented in 3.0 in M10.

Best Regards

Klemen

Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat

AllanThompson — Tue, 04 Nov 2014 22:22:17 GMT

Hi Klemen,

Yes, this became available with Creo 3.0 M010, but there is an additional requirement that you need to update your license pack.

There is a new license pack line item called Mold Analysis Lite that PTC should be adding to every customer's license pack automatically (for those on support).

All the details are here: https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS187881

Regards,

Allan

Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat

TomD.inPDX — Wed, 05 Nov 2014 03:34:14 GMT

I wonder if that is why I cannot find the Manufacturing Lite module in my Creo 2.0.

Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat

kerzen — Fri, 07 Nov 2014 07:38:42 GMT

Hi, there is some update on this issue

First; You need to upgrade your licence for free to enable Mold Analysis Lite.

Second; When you do that you get enabled Mold Analysis Lite

Third; What is enabled in Mold Analysis Lite is useless.

Hope that in future Lite versions will be more useful.

Best Regards

Klemen

Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat

magnus.salomons — Wed, 26 Nov 2014 04:19:51 GMT

Isn't it supposed to be available via Applications- Mold Analysis? Mine is still greyed out even though the Mold Anaysis Lite is shown in System information under configured license options.

Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat

kerzen — Thu, 27 Nov 2014 13:42:31 GMT

Hi Magnus,

Did you install it?

Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat

magnus.salomons — Thu, 27 Nov 2014 14:18:04 GMT

Thanks Klemen...I did not....forgot about the options during installations.

Re: Ptc Creo and embeded basic Moldex 3d capabilities in every seat

bmüller — Tue, 05 Jun 2018 12:56:57 GMT

Missing IntelMPI might be a reason too.

https://www.ptc.com/en/support/article?n=CS187138