topic Re: Trajectory profile cut - No Retracts between passes in Manufacturing (CAM) https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Trajectory-profile-cut-No-Retracts-between-passes/m-p/430354#M2114 <HTML><HEAD></HEAD><BODY><P>Your a rock star!</P></BODY></HTML> Fri, 02 Sep 2011 11:51:15 GMT Jeff 2011-09-02T11:51:15Z Trajectory profile cut - No Retracts between passes https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Trajectory-profile-cut-No-Retracts-between-passes/m-p/430351#M2111 I don't know if anyone knew this parameter that i discovered this morning while trying to get the tool to stop retracting between passes. But it does stop the retracts while trajectory milling a profile.This seems to allow you to use lead in and out and move to the next cut without Sun, 13 Dec 2020 19:16:43 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Trajectory-profile-cut-No-Retracts-between-passes/m-p/430351#M2111 SteveLucas 2020-12-13T19:16:43Z Re: Trajectory profile cut - No Retracts between passes https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Trajectory-profile-cut-No-Retracts-between-passes/m-p/430352#M2112 <HTML><HEAD></HEAD><BODY><P>here is a picture of the tool path motion. been looking for this for a long time.</P><P><IMG alt="no retract 2.JPG" class="jive-image" src="https://community.ptc.com/legacyfs/online/25212_no+retract+2.JPG" /></P><P><IMG alt="no retract 1.JPG" class="jive-image-thumbnail jive-image" onclick="" src="https://community.ptc.com/legacyfs/online/25213_no+retract+1.JPG" width="450" /> </P></BODY></HTML> Thu, 01 Sep 2011 14:11:55 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Trajectory-profile-cut-No-Retracts-between-passes/m-p/430352#M2112 SteveLucas 2011-09-01T14:11:55Z Re: Trajectory profile cut - No Retracts between passes https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Trajectory-profile-cut-No-Retracts-between-passes/m-p/430353#M2113 <HTML><HEAD></HEAD><BODY><P>Nice!</P></BODY></HTML> Thu, 01 Sep 2011 14:20:04 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Trajectory-profile-cut-No-Retracts-between-passes/m-p/430353#M2113 NickMihelich 2011-09-01T14:20:04Z Re: Trajectory profile cut - No Retracts between passes https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Trajectory-profile-cut-No-Retracts-between-passes/m-p/430354#M2114 <HTML><HEAD></HEAD><BODY><P>Your a rock star!</P></BODY></HTML> Fri, 02 Sep 2011 11:51:15 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Trajectory-profile-cut-No-Retracts-between-passes/m-p/430354#M2114 Jeff 2011-09-02T11:51:15Z