topic Show NC Sequence CSYS in Model Tree in Manufacturing (CAM) https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Show-NC-Sequence-CSYS-in-Model-Tree/m-p/559739#M4156 <P>Is there a parameter that can be added as a column in the model tree that will show each NC Sequence coordinate system used?</P> Mon, 09 Jul 2018 14:46:06 GMT ScottJohnson 2018-07-09T14:46:06Z Show NC Sequence CSYS in Model Tree https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Show-NC-Sequence-CSYS-in-Model-Tree/m-p/559739#M4156 <P>Is there a parameter that can be added as a column in the model tree that will show each NC Sequence coordinate system used?</P> Mon, 09 Jul 2018 14:46:06 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Show-NC-Sequence-CSYS-in-Model-Tree/m-p/559739#M4156 ScottJohnson 2018-07-09T14:46:06Z Re: Show NC Sequence CSYS in Model Tree https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Show-NC-Sequence-CSYS-in-Model-Tree/m-p/559766#M4157 <P>I don't know of any such column or whatnot to show which CSYS is used by a particular NC Sequence. I'd hoped that it might highlight the pertinent CSYS when I picked the NC Sequence from the model tree, but no such luck.</P> <P>Guess the only way to be absolutely sure is the tedious Edit Definition nightmare.</P> Mon, 09 Jul 2018 17:06:48 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Show-NC-Sequence-CSYS-in-Model-Tree/m-p/559766#M4157 KenFarley 2018-07-09T17:06:48Z Re: Show NC Sequence CSYS in Model Tree https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Show-NC-Sequence-CSYS-in-Model-Tree/m-p/591244#M4406 <P>The Process Manager will show which CSYS each sequence uses. Just enable the "Orientation" from the "Mfg Setup Items".</P> Tue, 29 Jan 2019 14:40:21 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Show-NC-Sequence-CSYS-in-Model-Tree/m-p/591244#M4406 Thom 2019-01-29T14:40:21Z