https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Add-functionality-to-delete-references-used-in-an-NC-step-by-RMB/m-p/921224#M5388 <P>I might be wrong, but I think the way to remove curves that have been used for a trajectory such as this, you need to edit the definition of the feature, then "unselect" the offending entities. That's how I will usually take care of things like a surface that is mistakenly included (usually an extra plane I didn't know I'd selected) or a bad hole axis, etc.</P> Wed, 03 Jan 2024 17:03:12 GMT KenFarley 2024-01-03T17:03:12Z https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Add-functionality-to-delete-references-used-in-an-NC-step-by-RMB/m-p/921185#M5387 <P>I had the following request in today from a customer.</P><P>&nbsp;</P><P>How do I delete the references used in an NC step, Using the references right mouse click doesn't allow the option.</P><P>&nbsp;</P><P>Customer on Creo 4 F000, I have also tested on 10.0.2.0.</P><P>Only way seems to be to edit the Tool Motion entries.</P> Wed, 03 Jan 2024 15:15:32 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Add-functionality-to-delete-references-used-in-an-NC-step-by-RMB/m-p/921185#M5387 JBrigham 2024-01-03T15:15:32Z https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Add-functionality-to-delete-references-used-in-an-NC-step-by-RMB/m-p/921224#M5388 <P>I might be wrong, but I think the way to remove curves that have been used for a trajectory such as this, you need to edit the definition of the feature, then "unselect" the offending entities. That's how I will usually take care of things like a surface that is mistakenly included (usually an extra plane I didn't know I'd selected) or a bad hole axis, etc.</P> Wed, 03 Jan 2024 17:03:12 GMT https://www.ptcusercommunity.com/t5/Manufacturing-CAM/Add-functionality-to-delete-references-used-in-an-NC-step-by-RMB/m-p/921224#M5388 KenFarley 2024-01-03T17:03:12Z