topic Re: Flexible offset is changing chamfer dimensions with 0.00 Dimension entry. in 3D Part & Assembly Design

Flexible offset is changing chamfer dimensions with 0.00 Dimension entry.

Abhinand — Wed, 04 Oct 2023 08:32:17 GMT

Flexible offset is changing the chamfer dimension from 0.50 to 0.30 with 0.00 offset. this should not happen.

I am using Creo 7.

Re: Flexible offset is changing chamfer dimensions with 0.00 Dimension entry.

Chris3 — Wed, 04 Oct 2023 12:58:49 GMT

I would suggest you open up a ticket with PTC and have them review your part.

Re: Flexible offset is changing chamfer dimensions with 0.00 Dimension entry.

tbraxton — Wed, 04 Oct 2023 14:56:06 GMT

Upload the problem part here. This will enable users to investigate the problem, a screenshot is not sufficient on this case to determine root cause.

Re: Flexible offset is changing chamfer dimensions with 0.00 Dimension entry.

Abhinand — Mon, 09 Oct 2023 10:22:29 GMT

Hai,

please refer attached model. On further study I understand that rearranging the chamfer may help to avoid this issue. but still, this should not happen.

Re: Flexible offset is changing chamfer dimensions with 0.00 Dimension entry.

tbraxton — Mon, 09 Oct 2023 15:56:46 GMT

It looks like a quick fix is to reorder the offset feature as shown in the video below. There may be a limitation with the algorithm causing the issue you have noted, I would suggest creating a support call with PTC and ask them to clarify the behavior. When you get an answer, please add it to this thread.

(view in My Videos)