topic Re: Create Scale note for each view in 3D Part & Assembly Design

Create Scale note for each view

RR_10572109 — Mon, 10 Jun 2024 09:25:37 GMT

In my drawing i have place 3 types of view with different different scales and I deleted the default scale note but now i need to create a new scale note for each views again. Suggest me with a best way to create that note again easily.

Ramaniedharan R

Re: Create Scale note for each view

tbraxton — Mon, 10 Jun 2024 11:10:28 GMT

There are some parameters for scale available in drawing mode. This is for a detailed view "A" with a scale of 4

The syntax of the note shown above will look like this in a text editor.

{0:&view_name}(&det_scale)

In general use this:

The drawing parameter scale_of_view_x evaluates the drawing scale of whichever view has name X.

For example, to call out the scale of a view named DETAILED_BAR, type &scale_of_view_detailed_bar.

Re: Create Scale note for each view

kdirth — Mon, 10 Jun 2024 12:58:40 GMT

Change view back to Default scale for sheet and apply, then change the scale back to the desired Custom scale.

Re: Create Scale note for each view

vnamboodheri — Mon, 17 Jun 2024 11:42:06 GMT

Hello @RR_10572109,

It looks like you have some responses from some community members. If any of these replies helped you solve your question please mark the appropriate reply as the Accepted Solution.

Of course, if you have more to share on your issue, please let the Community know so other community members can continue to help you.

Thanks,
Community Moderation Team.