topic Re: Tangent edges in drawing: show at component level in 3D Part & Assembly Design https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Tangent-edges-in-drawing-show-at-component-level/m-p/378973#M13681 <HTML><HEAD></HEAD><BODY><P>You should be able to set this in the view manager (3D mode). I am 99% sure you can do it in drawing mode too. Look at component display settings.</P></BODY></HTML> Wed, 27 Jun 2012 22:07:25 GMT DonRiley 2012-06-27T22:07:25Z Tangent edges in drawing: show at component level https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Tangent-edges-in-drawing-show-at-component-level/m-p/378972#M13680 Is there a way to show the tangent edges of a component in an assembly drawing?There is one component in a multi-component assembly for which I need to show the tangent egdes. Is there a way to do this?Thanks! Sat, 12 Dec 2020 18:49:15 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Tangent-edges-in-drawing-show-at-component-level/m-p/378972#M13680 KrisR 2020-12-12T18:49:15Z Re: Tangent edges in drawing: show at component level https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Tangent-edges-in-drawing-show-at-component-level/m-p/378973#M13681 <HTML><HEAD></HEAD><BODY><P>You should be able to set this in the view manager (3D mode). I am 99% sure you can do it in drawing mode too. Look at component display settings.</P></BODY></HTML> Wed, 27 Jun 2012 22:07:25 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Tangent-edges-in-drawing-show-at-component-level/m-p/378973#M13681 DonRiley 2012-06-27T22:07:25Z