topic Text below angular dimensions in drawings in 3D Part & Assembly Design

Text below angular dimensions in drawings

MK_10622412 — Wed, 27 Nov 2024 10:52:53 GMT

Hello.

Please tell me how to move the second dimension line below the angular dimension line as on attached picture? In a usual linear dimension, it is enough to move the text to a new line in "Dimension Text" and it wraps under the line, but in angular size this does not work.

Re: Text below angular dimensions in drawings

AJ_TROGLIO — Wed, 27 Nov 2024 14:14:54 GMT

I assume you are using ISO tolerancing standard. To verify, in a drawing, file/prepare/drawing properties. Select the ISO tolerancing standard.

Then select change next to detail options and scroll down till you find;

default_angdim_text_orientation.

set that to parallel_fully_outside

My result is attached.

Re: Text below angular dimensions in drawings

MK_10622412 — Thu, 28 Nov 2024 06:36:45 GMT

Thank you for reply, but it's not what I want.

I mean that in linear dimension, when I move note on next line in "Dimension Text " field it goes to below dim line.

But in the same situation in angular dimension all text stay above dim line.

Changing default_angdim_text_orientation not help.

Re: Text below angular dimensions in drawings

AJ_TROGLIO — Mon, 02 Dec 2024 13:08:57 GMT

I see.

Set the drawing detail option 'default_angdim_text_orientation' to 'parallel_outside' then.

And when you edit the angular dimension, put carriage a return line and then enter in your additional text

See attached.

Re: Text below angular dimensions in drawings

MK_10622412 — Wed, 04 Dec 2024 11:26:05 GMT

Thank you. It works.