topic Re: creating cross section-Creo parametric 10 in 3D Part & Assembly Design

creating cross section-Creo parametric 10

Prakash_P — Fri, 24 Jan 2025 11:40:32 GMT

Need to create a section that combines a full section and a half section for a concentrically assembled assembly. Please refer "section.png" for detail info.

Thanks in Advance

Prakash

Re: creating cross section-Creo parametric 10

KenFarley — Fri, 24 Jan 2025 12:47:11 GMT

The reason you can't do this is because it is not standard sectioning. Or at least not like anything I've ever seen. How would the section be referenced in a view orthogonal to the section view? You can't have a combination of an offset section and a planar section in this fashion. Why not just make an offset section with the 1/4 "pie slice" cut out?

Re: creating cross section-Creo parametric 10

manjunathrv — Tue, 28 Jan 2025 16:02:46 GMT

See the attachment. I was able to achieve this using 2 sections in a view.

Re: creating cross section-Creo parametric 10

anursingh — Wed, 26 Feb 2025 19:56:10 GMT

Hi @Prakash_P,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Please note that industry experts also review the replies and may eventually accept one of them as solution on your behalf.
Of course, if you have more to share on your issue, please pursue the conversation.

Thanks,
Anurag