topic Re: "No hidden" lines in half section in 3D Part & Assembly Design

"No hidden" lines in half section

AR_13238176 — Wed, 09 Apr 2025 18:14:35 GMT

Hello,
I want to remove hidden lines in my half section (circled red in attached picture) but still have hidden lines activated in the remaning part of the view (circled blue in attached picture) - how can I make this happen? I'm currently on Creo 11

Thankful for all the help I can get.
/ Andreas

Re: "No hidden" lines in half section

StephenW — Wed, 09 Apr 2025 18:34:34 GMT

I don't think you can do that directly, at least to my knowledge.

You can use edge display under the layout tab to erase the specific hidden lines you don't want to see. Its a very manual process and if it is a lot of lines, it will not be a very pleasant experience.

Re: "No hidden" lines in half section

DB@HuscoInt — Wed, 09 Apr 2025 20:02:10 GMT

Set the config option "hlr_for_xhatches" yes in config file and restart. Should remove the hidden lines in the section side only.

Re: "No hidden" lines in half section

måsberg — Thu, 10 Apr 2025 14:11:54 GMT

Even with Edge Display Rounds and Cosmetic Threads can not be removed.

Re: "No hidden" lines in half section

anursingh — Sun, 27 Apr 2025 17:36:57 GMT

Hi @AR_13238176,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Of course, if you have more to share on your issue, please pursue the conversation.

Thanks,
Anurag