topic Re: Total List of Materials to long for Drawing in 3D Part & Assembly Design

Total List of Materials to long for Drawing

Alex_R730 — Mon, 21 Apr 2025 20:26:04 GMT

Hello ptc community,

If I create a List of materials (BOM) of an large assembly, the list does overlap with the frame of the drawing.

Is it possible to split the list from one to two, to shorten the length?

I know that I could use a bigger format for example to change from an A3 sheet to A2.

But if everything fits to the format sheet (If the list is split to two) it would be worse to take a bigger sheet.

Version of creo is 4.0

Yours sincerely,

Alexander

Re: Total List of Materials to long for Drawing

BenLoosli — Mon, 21 Apr 2025 20:39:32 GMT

There is an option in the repeat region menu to paginate the BOM into multiple columns. You can then move a portion of the BOM to a different sheet.

Re: Total List of Materials to long for Drawing

anursingh — Mon, 28 Apr 2025 08:40:43 GMT

Hi @Alex_R730,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Of course, if you have more to share on your issue, please pursue the conversation.

Thanks,
Anurag

Re: Total List of Materials to long for Drawing

Alex_R730 — Wed, 30 Apr 2025 14:30:15 GMT

You mean in the menu manager right?

Which one is it.

Re: Total List of Materials to long for Drawing

kdirth — Wed, 30 Apr 2025 14:35:04 GMT

Creo 7:

Re: Total List of Materials to long for Drawing

Alex_R730 — Wed, 30 Apr 2025 14:44:07 GMT

Thank you, in time i try that out.