topic Re: Add bend allowance table to creo in 3D Part & Assembly Design

Add bend allowance table to creo

AA_12889973 — Tue, 19 Aug 2025 18:52:21 GMT

I want to add some kind of table that can determine bend radius according to sheet thickness i am switching from solid edge

Re: Add bend allowance table to creo

tbraxton — Tue, 19 Aug 2025 18:56:57 GMT

Are you asking if you can use a custom bend table for Creo Sheetmetal parts? Your question is not clear on the objective.

Custom bend tables are supported.

https://support.ptc.com/help/creo/creo_pma/r11.0/usascii/index.html#page/sheetmetal/sheetmetaldesign/About_Bend_Tables.html

Re: Add bend allowance table to creo

anursingh — Tue, 30 Sep 2025 22:25:43 GMT

Hi @AA_12889973,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Please note that industry experts also review the replies and may eventually accept one of them as solution on your behalf.
Of course, if you have more to share on your issue, please pursue the conversation.

Thanks,
Anurag