topic Re: Hatch of a section not completely shown in 3D Part & Assembly Design

Hatch of a section not completely shown

GF_10659403 — Thu, 15 Jan 2026 09:19:42 GMT

I am using Creo Parametric Release 11.0 and Datecode11.0.3.0; in a single view, the hatch of a section is not completely shown. In a different view with the same charatheristics, the hatch is correctly shown.

Re: Hatch of a section not completely shown

Catalina — Thu, 15 Jan 2026 09:21:33 GMT

Hi @GF_10659403

Thank you for your question!

I’d like to recommend to bring more details and context to your initial inquiry.

Please add screenshot(s) to better understand what you are trying to do in your process.

Please refer to this guideline to make your questions more likely to receive a quick and useful answer.

This will increase your chances to receive meaningful help from other Community members.

Here's what a good question for Creo looks like.

Thank you for your participation and please let me know if you need further assistance!

Best regards,

Re: Hatch of a section not completely shown

GF_10659403 — Thu, 15 Jan 2026 09:42:14 GMT

Hi Catalina, I forgot the image...

A you can see, the hatch on section B-B is complete, but something doesn't work on section A-A.

Re: Hatch of a section not completely shown

Dale_Rosema — Thu, 15 Jan 2026 12:46:06 GMT

Try moving the bottom portion of the section line .01 to the right or the left. Sometimes when going through the center of cylinders Creo has an issue due to the splitting of the cylinder in half.

Re: Hatch of a section not completely shown

GF_10659403 — Thu, 15 Jan 2026 13:12:50 GMT

Thanks Dale, but nothing changed flipping back and forth on the other side.

Re: Hatch of a section not completely shown

GF_10659403 — Thu, 15 Jan 2026 13:24:38 GMT

Finally I found the solution... With the option in the image attached set on "No" the hatch is now completely shown.

Re: Hatch of a section not completely shown

GF_10659403 — Mon, 23 Mar 2026 07:14:12 GMT

Hi,

the related config.pro option to set to solve the problem is:

xlr_for_xhatches

switch from "yes" to "no".