topic Re: Section cutting plane line font is different between two like drawings but drawing configs appear to be the same. in 3D Part & Assembly Design

Section cutting plane line font is different between two like drawings but drawing configs appear to be the same.

gspencer-4 — Wed, 02 May 2018 23:57:35 GMT

I couldn't find a better area to ask this: I have two drawings with nearly the exact same part detailed. One has a section cutting plane line font as a dense phantom line. The other has a very wide spread phantom line font that, in my opinion, does not look good on the print.

Re: Section cutting plane line font is different between two like drawings but drawing configs appear to be the same.

MartinHanak — Tue, 07 Feb 2017 17:47:48 GMT

Hi,

I guess that the difference is cause by line_style_length drawing option.

Re: Section cutting plane line font is different between two like drawings but drawing configs appear to be the same.

gspencer-4 — Tue, 07 Feb 2017 18:21:21 GMT

Hi, thanks for the reply. I don't see that drawing option in the drawing properties. Is that for Creo 2? Also, I should mention that it appears to be any NEW drawing I create after around the time I created that first drawing. I guess any drawing that was made before that I modify has a drawing option that is already set while every drawing I make now is set up with the new cutting plane drawing option? But again, I don't see any differences in the drawing properties. Some hidden config setting?

Re: Section cutting plane line font is different between two like drawings but drawing configs appear to be the same.

gspencer-4 — Tue, 07 Feb 2017 18:22:03 GMT

Re: Section cutting plane line font is different between two like drawings but drawing configs appear to be the same.

MartinHanak — Tue, 07 Feb 2017 18:36:03 GMT

Hi,

open both drawings and save their drawing properties into files. Upload these two files (use How to Attach a File to a Discussion Reply procedure), I can compare them for you.