topic Re: Layer problem in Drawing in Creo 2.0. in 3D Part & Assembly Design

Layer problem in Drawing in Creo 2.0.

ssharma-6 — Sun, 13 Dec 2020 01:42:02 GMT

Layer of views is not showing in layer tree by the selection of active layer object selection.

for more hint please the attachment.

Thanks in Advance

Sachin

This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

Re: Layer problem in Drawing in Creo 2.0.

StephenW — Fri, 15 Jul 2016 13:19:49 GMT

What exactly are you asking? When you use the selection arrow, that allows on-screen selection.

When you use the drop down arrow, then you see the views.

Re: Layer problem in Drawing in Creo 2.0.

ssharma-6 — Fri, 15 Jul 2016 16:53:53 GMT

When I use drop down arrow, then display assembly's views name only. There is no drawing view name like bottom_4, left_12 etc.

Re: Layer problem in Drawing in Creo 2.0.

kdirth — Fri, 15 Jul 2016 19:44:52 GMT

May be a very old drawing or copied from an old one. I happened to pull up a drawing redrawn in ProE in 2004 and saw the same thing. Pulling up a drawing created this year it worked as expected.

Re: Layer problem in Drawing in Creo 2.0.

kdirth — Fri, 15 Jul 2016 19:54:49 GMT

The only way I found to get the views to show up was to add a new view and delete it. Somehow this triggered the views to be added to the layer tree.

Re: Layer problem in Drawing in Creo 2.0.

MartinHanak — Mon, 18 Jul 2016 07:57:08 GMT

Hi,

activate Layer tree
click Setting button and then Drawing Layer Status command from context menu
check both options (see picture below)
click arrow button and select any drawing view
expand view list ... now you can see views, too

Re: Layer problem in Drawing in Creo 2.0.

ssharma-6 — Wed, 20 Jul 2016 02:49:12 GMT

Thanks Martin

This is right way

Re: Layer problem in Drawing in Creo 2.0.

Dale_Rosema — Wed, 20 Jul 2016 12:08:35 GMT

If Martin's answer was correct, don't forget to mark it for those who may search on this topic later.