topic BOM Table reporting. in 3D Part & Assembly Design

BOM Table reporting.

AndyHermanson — Sun, 13 Dec 2020 05:40:23 GMT

Gurus,Was wondering if anyone has come up with a solution to this?[cid:image002.png@01CD4EFC.DF312F00]Andy HermansonEngineering Design Applicationstel 605.275.1040 x51114 mobile 605.310.8168website www.daktronics.com

BOM Table reporting.

RandyJones — Thu, 26 Oct 2017 20:22:24 GMT

On 06/20/12 15:53, Andy Hermanson wrote:
>
> Gurus,
>
> Was wondering if anyone has come up with a solution to this?
>

Flexible components.
Introduced somewhere in the 2001 or Wildfire 1 timeframe.

> Andy Hermanson*
> *Engineering Design Applications
>
> tel605.275.1040 x51114mobile605.310.8168
> website www.daktronics.com

BOM Table reporting.

amedina — Wed, 20 Jun 2012 22:47:11 GMT

Are flexible components only accessible using the flex 3C license that cost
an arm and a leg? Ah soo tempting to find out... I think so. I think that
is why we never used it.

[BULK] BOM Table reporting.

TomU — Thu, 21 Jun 2012 12:00:27 GMT

Flexibility is available with the base license (foundation).

Tom U.

BOM Table reporting.

ptc-1932745 — Thu, 21 Jun 2012 12:38:42 GMT

Here's my 2 cents....

If you're modeling the gasket at different lengths, you have a family
table for all of these gaskets?

Use or create a parameter for the part number of this gasket to be used
in the BOM and add to the family table.

I have had this type of parameter update automatically by parsing the
length of the gasket value onto a parameter that includes the generic
part number as well.

The length of the gasket can be found by creating a saved measurement of
the curve length for the 'spine' that the gasket is swept along.

It may report the length in inches, so you have to do more programming
kung-fu to get the value in decimal feet and then convert this to a text
string that can be appended to text string that includes the generic
part number.

Christopher F. Gosnell

FPD Company

124 Hidden Valley Road

McMurray, PA 15317

BOM Table reporting.

MikeFoster — Thu, 21 Jun 2012 16:43:37 GMT

Flexibility is in Foundation. Right click on an assembly component and pick "Make Flexible".