topic Re: Boundary Blend.......worthless. in 3D Part & Assembly Design https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Boundary-Blend-worthless/m-p/225621#M57058 <HTML><HEAD></HEAD><BODY><P>Got it to work.....sort of. Funny, but at one end I have a curve, and it gives me a crease down the middle?!?! The surfaces aren't quite what I want, and still fail upon offset, but we'll see if I can't fix 'em. I'm hoping to convince the boss to buy ISDE, we'll see.</P><P></P><P>Of note, a datum curve projected on a surface is NOT as accurate as a curve from 2 surfaces intersecting, and was one of the things causing me problems. So, there was about a .0004 gap, that cleared up when I used an intersection curve.</P><P></P><P>I know they changed the software in WF (3 I think?) to change some of the way the curve calculations were done, in curves, especially when making a curve thru 2 projections, so, this might be part of the issue.</P></BODY></HTML> Tue, 15 May 2012 19:22:47 GMT Patriot_1776 2012-05-15T19:22:47Z Boundary Blend.......worthless. https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Boundary-Blend-worthless/m-p/225619#M57056 Ok, so, when WF came along, I noticedd that formerly pretty robust features like the "Boundary Blend" seemed to fail for no reason. I've got what should be a SIMPLE blend, and creo will show me the preview, but then it claims the "edges do not form a loop". WT_?????? Fri, 04 May 2018 21:31:33 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Boundary-Blend-worthless/m-p/225619#M57056 Patriot_1776 2018-05-04T21:31:33Z Re: Boundary Blend.......worthless. https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Boundary-Blend-worthless/m-p/225620#M57057 <HTML><HEAD></HEAD><BODY><P>Upload your simple blend, maybe someone can help.</P></BODY></HTML> Tue, 15 May 2012 06:21:15 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Boundary-Blend-worthless/m-p/225620#M57057 ProMan 2012-05-15T06:21:15Z Re: Boundary Blend.......worthless. https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Boundary-Blend-worthless/m-p/225621#M57058 <HTML><HEAD></HEAD><BODY><P>Got it to work.....sort of. Funny, but at one end I have a curve, and it gives me a crease down the middle?!?! The surfaces aren't quite what I want, and still fail upon offset, but we'll see if I can't fix 'em. I'm hoping to convince the boss to buy ISDE, we'll see.</P><P></P><P>Of note, a datum curve projected on a surface is NOT as accurate as a curve from 2 surfaces intersecting, and was one of the things causing me problems. So, there was about a .0004 gap, that cleared up when I used an intersection curve.</P><P></P><P>I know they changed the software in WF (3 I think?) to change some of the way the curve calculations were done, in curves, especially when making a curve thru 2 projections, so, this might be part of the issue.</P></BODY></HTML> Tue, 15 May 2012 19:22:47 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Boundary-Blend-worthless/m-p/225621#M57058 Patriot_1776 2012-05-15T19:22:47Z