topic Reg: Model Check Batch Mode in windows in 3D Part & Assembly Design

topic Reg: Model Check Batch Mode in windows in 3D Part & Assembly Design https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6276#M58407 <HTML><HEAD></HEAD><BODY>This email contained a .zip file attachment. Raytheon does not allow email attachments that are considered likely to contain malicious code. For your protection this attachment has been removed.<BR /><BR />If this email is from an unknown source, please simply delete this email.<BR /><BR />If this email was expected, and it is from a known sender, you may follow the below suggested instructions to obtain these types of attachments.<BR /><BR />+ Instruct the sender to enclose the file(s) in a ".zip" compressed file, and rename the ".zip" compressed file with a different extension, such as, ".rtnzip". Password protecting the renamed ".zip" compressed file adds an additional layer of protection. When you receive the file, please rename it with the extension ".zip".<BR /><BR />Additional instructions and options on how to receive these attachments can be found at:<BR /><BR /><A href="http://security.it.ray.com/antivirus/extensions.html" style=">http://security.it.ray.com/antivirus/extensions.html</a><br /><a href=; >http://security.it.ray.com/news/2007/zipfiles.html</a><br /><br />Should you have any questions or difficulty with these instructions, please contact the Help Desk at 877.844.4712<br /><br />---<br /><br />Hello Buddies<br />Good Day!!<br />Hope every one doing fine. I am using Pro/E Wildfire 3.0. I have succesfuly configured model check in interactive mode.<br /> I am about to run a Modelcheck on some thousands of files. Going through on ptc help and the good article from ProfilesMagazin i decided to run modelcheck in batch mode. I use windows platform.<br />So that i have created a list of files using the<br />dir *.prt.* *.asm.* *.drw.* /b > list.lst<br />Then searched to the installation directory /bin. From there i have run modelcheck.bat. Modelcheck window appeared and i choosed" for=""><BR />It seems I did not get any model check out put report in my current directory. I am not sure Where I did mistake.<BR /> Kindly go through my attachment and help me to slove this issue<BR />Any help will be appreciated.<BR /> Suganthan Rajamanickam<BR /> Pro-e System Analyst Trane Design Centre, India<BR />Ingersoll Rand<BR /><BR /><BR /> -----End Original Message-----</A></BODY></HTML> Fri, 03 Sep 2010 07:07:53 GMT suganthan.mech 2010-09-03T07:07:53Z Reg: Model Check Batch Mode in windows https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6275#M58406 Hello BuddiesGood Day!!Hope every one doing fine. I am using Pro/E Wildfire 3.0. I have succesfuly configured model check in interactive mode.I am about to run a Modelcheck on some thousands of files. Going through on ptc help and the good article from ProfilesMagazin i decided to Sun, 13 Dec 2020 05:57:04 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6275#M58406 suganthan.mech 2020-12-13T05:57:04Z Reg: Model Check Batch Mode in windows https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6276#M58407 <HTML><HEAD></HEAD><BODY>This email contained a .zip file attachment. Raytheon does not allow email attachments that are considered likely to contain malicious code. For your protection this attachment has been removed.<BR /><BR />If this email is from an unknown source, please simply delete this email.<BR /><BR />If this email was expected, and it is from a known sender, you may follow the below suggested instructions to obtain these types of attachments.<BR /><BR />+ Instruct the sender to enclose the file(s) in a ".zip" compressed file, and rename the ".zip" compressed file with a different extension, such as, ".rtnzip". Password protecting the renamed ".zip" compressed file adds an additional layer of protection. When you receive the file, please rename it with the extension ".zip".<BR /><BR />Additional instructions and options on how to receive these attachments can be found at:<BR /><BR /><A href="http://security.it.ray.com/antivirus/extensions.html" style=">http://security.it.ray.com/antivirus/extensions.html</a><br /><a href=; >http://security.it.ray.com/news/2007/zipfiles.html</a><br /><br />Should you have any questions or difficulty with these instructions, please contact the Help Desk at 877.844.4712<br /><br />---<br /><br />Hello Buddies<br />Good Day!!<br />Hope every one doing fine. I am using Pro/E Wildfire 3.0. I have succesfuly configured model check in interactive mode.<br /> I am about to run a Modelcheck on some thousands of files. Going through on ptc help and the good article from ProfilesMagazin i decided to run modelcheck in batch mode. I use windows platform.<br />So that i have created a list of files using the<br />dir *.prt.* *.asm.* *.drw.* /b > list.lst<br />Then searched to the installation directory /bin. From there i have run modelcheck.bat. Modelcheck window appeared and i choosed" for=""><BR />It seems I did not get any model check out put report in my current directory. I am not sure Where I did mistake.<BR /> Kindly go through my attachment and help me to slove this issue<BR />Any help will be appreciated.<BR /> Suganthan Rajamanickam<BR /> Pro-e System Analyst Trane Design Centre, India<BR />Ingersoll Rand<BR /><BR /><BR /> -----End Original Message-----</A></BODY></HTML> Fri, 03 Sep 2010 07:07:53 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6276#M58407 suganthan.mech 2010-09-03T07:07:53Z Reg: Model Check Batch Mode in windows https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6277#M58408 <HTML><HEAD></HEAD><BODY>This email contained a .zip file attachment. Raytheon does not allow email attachments that are considered likely to contain malicious code. For your protection this attachment has been removed.<BR /><BR />If this email is from an unknown source, please simply delete this email.<BR /><BR />If this email was expected, and it is from a known sender, you may follow the below suggested instructions to obtain these types of attachments.<BR /><BR />+ Instruct the sender to enclose the file(s) in a ".zip" compressed file, and rename the ".zip" compressed file with a different extension, such as, ".rtnzip". Password protecting the renamed ".zip" compressed file adds an additional layer of protection. When you receive the file, please rename it with the extension ".zip".<BR /><BR />Additional instructions and options on how to receive these attachments can be found at:<BR /><BR /><A href="http://security.it.ray.com/antivirus/extensions.html" style=">http://security.it.ray.com/antivirus/extensions.html</a><br /><a href=; >http://security.it.ray.com/news/2007/zipfiles.html</a><br /><br />Should you have any questions or difficulty with these instructions, please contact the Help Desk at 877.844.4712<br /><br />---<br /><br />Hello Buddies<br />Good Day!!<br />Hope every one doing fine. I am using Pro/E Wildfire 3.0. I have succesfuly configured model check in interactive mode.<br /> I am about to run a Modelcheck on some thousands of files. Going through on ptc help and the good article from ProfilesMagazin i decided to run modelcheck in batch mode. I use windows platform.<br />So that i have created a list of files using the<br />dir *.prt.* *.asm.* *.drw.* /b > list.lst<br />Then searched to the installation directory /bin. From there i have run modelcheck.bat. Modelcheck window appeared and i choosed" for=""><BR />It seems I did not get any model check out put report in my current directory. I am not sure Where I did mistake.<BR /> Kindly go through my attachment and help me to slove this issue<BR />Any help will be appreciated.<BR /> Suganthan Rajamanickam<BR /> Pro-e System Analyst Trane Design Centre, India<BR />Ingersoll Rand<BR /><BR /><BR /> -----End Original Message-----</A></BODY></HTML> Fri, 03 Sep 2010 07:08:08 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6277#M58408 suganthan.mech 2010-09-03T07:08:08Z Reg: Model Check Batch Mode in windows https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6278#M58409 <HTML><HEAD></HEAD><BODY>This email contained a .zip file attachment. Raytheon does not allow email attachments that are considered likely to contain malicious code. For your protection this attachment has been removed.<BR /><BR />If this email is from an unknown source, please simply delete this email.<BR /><BR />If this email was expected, and it is from a known sender, you may follow the below suggested instructions to obtain these types of attachments.<BR /><BR />+ Instruct the sender to enclose the file(s) in a ".zip" compressed file, and rename the ".zip" compressed file with a different extension, such as, ".rtnzip". Password protecting the renamed ".zip" compressed file adds an additional layer of protection. When you receive the file, please rename it with the extension ".zip".<BR /><BR />Additional instructions and options on how to receive these attachments can be found at:<BR /><BR /><A href="http://security.it.ray.com/antivirus/extensions.html" style=">http://security.it.ray.com/antivirus/extensions.html</a><br /><a href=; >http://security.it.ray.com/news/2007/zipfiles.html</a><br /><br />Should you have any questions or difficulty with these instructions, please contact the Help Desk at 877.844.4712<br /><br />---<br /><br />Hello Buddies<br />Good Day!!<br />Hope every one doing fine. I am using Pro/E Wildfire 3.0. I have succesfuly configured model check in interactive mode.<br /> I am about to run a Modelcheck on some thousands of files. Going through on ptc help and the good article from ProfilesMagazin i decided to run modelcheck in batch mode. I use windows platform.<br />So that i have created a list of files using the<br />dir *.prt.* *.asm.* *.drw.* /b > list.lst<br />Then searched to the installation directory /bin. From there i have run modelcheck.bat. Modelcheck window appeared and i choosed" for=""><BR />It seems I did not get any model check out put report in my current directory. I am not sure Where I did mistake.<BR /> Kindly go through my attachment and help me to slove this issue<BR />Any help will be appreciated.<BR /> Suganthan Rajamanickam<BR /> Pro-e System Analyst Trane Design Centre, India<BR />Ingersoll Rand<BR /><BR /><BR /> -----End Original Message-----</A></BODY></HTML> Fri, 03 Sep 2010 07:08:23 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6278#M58409 suganthan.mech 2010-09-03T07:08:23Z Reg: Model Check Batch Mode in windows https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6279#M58410 <HTML><HEAD></HEAD><BODY>This email contained a .zip file attachment. Raytheon does not allow email attachments that are considered likely to contain malicious code. For your protection this attachment has been removed.<BR /><BR />If this email is from an unknown source, please simply delete this email.<BR /><BR />If this email was expected, and it is from a known sender, you may follow the below suggested instructions to obtain these types of attachments.<BR /><BR />+ Instruct the sender to enclose the file(s) in a ".zip" compressed file, and rename the ".zip" compressed file with a different extension, such as, ".rtnzip". Password protecting the renamed ".zip" compressed file adds an additional layer of protection. When you receive the file, please rename it with the extension ".zip".<BR /><BR />Additional instructions and options on how to receive these attachments can be found at:<BR /><BR /><A href="http://security.it.ray.com/antivirus/extensions.html" style=">http://security.it.ray.com/antivirus/extensions.html</a><br /><a href=; >http://security.it.ray.com/news/2007/zipfiles.html</a><br /><br />Should you have any questions or difficulty with these instructions, please contact the Help Desk at 877.844.4712<br /><br />---<br /><br />Hello Buddies<br />Good Day!!<br />Hope every one doing fine. I am using Pro/E Wildfire 3.0. I have succesfuly configured model check in interactive mode.<br /> I am about to run a Modelcheck on some thousands of files. Going through on ptc help and the good article from ProfilesMagazin i decided to run modelcheck in batch mode. I use windows platform.<br />So that i have created a list of files using the<br />dir *.prt.* *.asm.* *.drw.* /b > list.lst<br />Then searched to the installation directory /bin. From there i have run modelcheck.bat. Modelcheck window appeared and i choosed" for=""><BR />It seems I did not get any model check out put report in my current directory. I am not sure Where I did mistake.<BR /> Kindly go through my attachment and help me to slove this issue<BR />Any help will be appreciated.<BR /> Suganthan Rajamanickam<BR /> Pro-e System Analyst Trane Design Centre, India<BR />Ingersoll Rand<BR /><BR /><BR /> -----End Original Message-----</A></BODY></HTML> Fri, 03 Sep 2010 07:08:39 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Reg-Model-Check-Batch-Mode-in-windows/m-p/6279#M58410 suganthan.mech 2010-09-03T07:08:39Z