https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Macro-with-parameter/m-p/568199#M67537 <P>Hello<BR />I would like to make macro with using a model parameter.<BR />I need macro to save drawing to dxf format. The name of dxf file has to be same as name of model.<BR />The name of model is one of parameter.<BR />I don´t know how automaticly use this parameter to create macro.<BR />(I don´t want to write the name of file after start the macro)<BR /><BR />Thank you for the advice</P> Mon, 27 Aug 2018 10:12:52 GMT romaning 2018-08-27T10:12:52Z https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Macro-with-parameter/m-p/568199#M67537 <P>Hello<BR />I would like to make macro with using a model parameter.<BR />I need macro to save drawing to dxf format. The name of dxf file has to be same as name of model.<BR />The name of model is one of parameter.<BR />I don´t know how automaticly use this parameter to create macro.<BR />(I don´t want to write the name of file after start the macro)<BR /><BR />Thank you for the advice</P> Mon, 27 Aug 2018 10:12:52 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Macro-with-parameter/m-p/568199#M67537 romaning 2018-08-27T10:12:52Z https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Macro-with-parameter/m-p/568433#M67538 <P>Hi Romaning,</P> <P>&nbsp;</P> <P>I don't know if your model and drawing have the same name. Probably yes...</P> <P>I send you the mapkey 'qw' that opens the drawing with the same name of the current model.</P> <P><STRONG>James</STRONG> shared it with 'Ptc Community' some time ago.</P> <P>I think you 'only' need to add the action, after opening the drawing, save a dxf...</P> Mon, 27 Aug 2018 19:48:38 GMT https://www.ptcusercommunity.com/t5/3D-Part-Assembly-Design/Macro-with-parameter/m-p/568433#M67538 Trebla 2018-08-27T19:48:38Z