topic Re: GOLF - Gentleman Only, Ladies Forbidden? in 3D Part & Assembly Design

GOLF - Gentleman Only, Ladies Forbidden?

VladimirPalffy — Sun, 13 Dec 2020 11:10:49 GMT

Is Golf an Acronym for Gentleman Only, Ladies Forbidden?... or How you can create and render GOLF BALL Steps for reproduce:1.) Open Creo Parametric and Create new solid model2.) Create base Revolve feature3.) Create Curve >> Point >> Revolve >> Pattern >> Copy

Re: GOLF - Gentleman Only, Ladies Forbidden?

TomD.inPDX — Wed, 13 Mar 2013 23:47:21 GMT

Interesting patterning, Vladimir 50mm diameter? That's one big golf ball!

Re: GOLF - Gentleman Only, Ladies Forbidden?

VladimirPalffy — Thu, 14 Mar 2013 06:11:33 GMT

Hi Antonius - I know,but... If you want to play "BIG" game = you need a "BIG BALL"

(if you need a smaller ball - do not forget use Scale model feature | I like parametric modeling / I like Creo )

Note from Wiki: Under the rules of golf, a golf ball weighs no more than 1.620 oz (45.93 grams), has a diameter not less than 1.680 in (42.67 mm)

Re: GOLF - Gentleman Only, Ladies Forbidden?

LeeCasey — Thu, 14 Mar 2013 10:08:58 GMT

Very nice Vladimir!

Re: GOLF - Gentleman Only, Ladies Forbidden?

CamiloParraPala — Thu, 14 Mar 2013 14:59:44 GMT

Also check this http://www.mcadcentral.com/creo-modeling/6536-golf-ball.html

Re: GOLF - Gentleman Only, Ladies Forbidden?

TomD.inPDX — Thu, 14 Mar 2013 21:25:48 GMT

It is amazing how the geometry is quite illusive to get a good solid pattern on a golf ball.

I did, however get the Icosa-Dodec scalable in a part file with a proper origin for my sacred geometry collection:

Then I was able to stellate the faces by intersecting all the points to the "sphere":

And with this as an underlay, I was able to get a semblance of locating all the dimple according to the right image on Wiki using face offsets for an accurate projection:

I am more than embarrassed, however, at the shear volume of features it required to get this far. But the upside is the core geometry driving the shape is this 1st feature from which 4 measurement features are used to drive all the geometry. Simply changing the diameter in relations updates everything with 2 regens.

Re: GOLF - Gentleman Only, Ladies Forbidden?

TomD.inPDX — Fri, 15 Mar 2013 19:09:06 GMT

Finally! Wiki right version with hex patterns filled to meet minimum dimple count.

Re: GOLF - Gentleman Only, Ladies Forbidden?

TomD.inPDX — Fri, 15 Mar 2013 20:30:49 GMT

I've added the "HOW" here: http://communities.ptc.com/message/199951#199951

Reg: creating a pattern in sphere

Re: GOLF - Gentleman Only, Ladies Forbidden?

VladimirPalffy — Thu, 26 Oct 2017 21:34:16 GMT

Spherically pattern - new pattern for Spherically shape

What do you think? It is good idea for new feature in Creo? - Vote here

Re: GOLF - Gentleman Only, Ladies Forbidden?

KulbirSandhu — Mon, 18 Mar 2013 13:44:27 GMT

(y) all these are awesome

Re: GOLF - Gentleman Only, Ladies Forbidden?

HarikrishnanR — Wed, 20 Mar 2013 09:38:48 GMT

Great work! thank you all for sharing this!

Re: GOLF - Gentleman Only, Ladies Forbidden?

VladimirPalffy — Thu, 26 Oct 2017 21:45:21 GMT

... You can use Golf ball like Holder and Charger - Golf ball not for "GOLF"

Re: GOLF - Gentleman Only, Ladies Forbidden?

CADQueen — Wed, 20 May 2015 18:14:44 GMT

Thumbs down for your acronym.

Thumbs up for your modeling skills.