topic Re: Cabling issues in PTC University Training https://www.ptcusercommunity.com/t5/PTC-University-Training/Cabling-issues/m-p/209828#M655 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>It should be possible to select a bundle, Right Click and select route. From the route dialog you should be able to select a new entry port.</P><P></P><P>However with that said I do know there is a bug which should be fixed very soon and i would suggest you speak to tech support and register your problem so you can be notified when the bug is fixed.</P><P></P><P>As a workaround you have extract the wires from the bundle. using multiselect select all the extracted wires, reroute them and then recreate the bundle.</P><P></P><P>thanks, Jim</P></BODY></HTML> Fri, 22 Nov 2013 10:36:17 GMT JimBarrettSmith 2013-11-22T10:36:17Z Cabling issues https://www.ptcusercommunity.com/t5/PTC-University-Training/Cabling-issues/m-p/209827#M654 Hi guys,I've been working with cabling application on ProE and I was able to modify an existing harness very easily.But, since the new Creo version was released, I'm having a few issues rerouting the bundles and wires. For example:- in ProE wf4, I could delete a portion of Fri, 04 May 2018 15:23:31 GMT https://www.ptcusercommunity.com/t5/PTC-University-Training/Cabling-issues/m-p/209827#M654 ptc-5370850 2018-05-04T15:23:31Z Re: Cabling issues https://www.ptcusercommunity.com/t5/PTC-University-Training/Cabling-issues/m-p/209828#M655 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>It should be possible to select a bundle, Right Click and select route. From the route dialog you should be able to select a new entry port.</P><P></P><P>However with that said I do know there is a bug which should be fixed very soon and i would suggest you speak to tech support and register your problem so you can be notified when the bug is fixed.</P><P></P><P>As a workaround you have extract the wires from the bundle. using multiselect select all the extracted wires, reroute them and then recreate the bundle.</P><P></P><P>thanks, Jim</P></BODY></HTML> Fri, 22 Nov 2013 10:36:17 GMT https://www.ptcusercommunity.com/t5/PTC-University-Training/Cabling-issues/m-p/209828#M655 JimBarrettSmith 2013-11-22T10:36:17Z