Part Text Vertical Protrusion

[Yogesh_Tambat]

How to protrude image 1 text vertically as in image 2 drawing?

[MikeBennett]

Hi @Yogesh_Tambat ,

According to CS63567, this cannot be done in a single text field in a sketch and multiple text fields should be used.

Hope this helps,

Michael

[KenFarley]

A discussion on somewhat the same topic from long ago (2016) initially asked by me. Doesn't seem like the capability of doing this exists yet, as far as I know.

https://community.ptc.com/t5/3D-Part-Assembly-Design/Vertical-text-creation/m-p/355053 

[Srinivasan-Iyer]

This still doesn't exist. Back then on WF2 or 3 I had to create a pattern of letters for a dial. Did it by dimension patterning a group (pattern as a place holder), Unpatterning and then changing the values. Later on, created a parameter & relation for the instances. I forgot how I did it. 

[anursingh]

Hi @Yogesh_Tambat,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Of course, if you have more to share on your issue, please pursue the conversation. 

Thanks,
Anurag