cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 

Community Tip - Help us improve the PTC Community by taking this short Community Survey! X

Need to change the COG location of an imported part.

jprabha
1-Newbie

Need to change the COG location of an imported part.

Hi, I need to set the COG of a lot of purchase part in the creo 3.0 models as per the measured COG provided. Can someone please help with the procedure?


This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
1 ACCEPTED SOLUTION

Accepted Solutions

They are in parameters once computed.  Look at parameters and the lower right hand corner of the UI.  You have the option to see the mass properties parameters.

View solution in original post

1 REPLY 1

They are in parameters once computed.  Look at parameters and the lower right hand corner of the UI.  You have the option to see the mass properties parameters.

Top Tags