CREO Manufacturing NC assembly

[MH_10983599]

I can complete all aspects of processing a model into a machined part except the output file needed for my machine. I have simple 3 axis proto tack SMX controller that needs a .gcd file output. I can only save and view my CL data into an .ncl format. W use Creo 10.0.3.0. Any assistance with post processors? 

[KenFarley]

There's a search at the very top of this forum layout, looks like a magnifying glass. If you type "Creo Post Processors" there you'll get a list of many past inquiries about this very thing. Here's one I responded to a while ago that was about a machine that sounds very similar to yours, but it doesn't have a "real" solution, just links, etc.

https://community.ptc.com/t5/Manufacturing-CAM/Post-processor-for-Fanuc-6-ProtoTrak-SMX-3-axis-CNC-mill/m-p/930373 

In brief, you'll have to look into how to set up a post processor for your particular setup. Creo does come with a bunch of default ones, or at least it did, so you just have to look for them. They might be shown to you by default, I'm not so sure. I configured my posts decades ago, so only work with the ones I have built.

[anursingh]

Hi @MH_10983599,

I wanted to see if you got the help you needed.

If so, please mark the appropriate reply as the Accepted Solution. It will help other members who may have the same question.
Of course, if you have more to share on your issue, please pursue the conversation. 

Thanks,
Anurag